Low-Loss 195 - 1.0/2.3 Male - Straight - Solder Center Crimp Outer connector

Indoor RF interconnect

Manufacturer: 123eWireless · MPN: 123-1951023MS

Scan to buy

Buy Now →

Details

The 123-1951023MS is a 1.0/2.3 Male Straight connector for Low-Loss 195 cable, with solder termination.

Native push-pull engagement on this 1.0/2.3 interface — no torque required while delivering full RF performance.

Factory-solder terminated for repeatable mechanical assembly and consistent contact performance across re-mate cycles.

Why this part

1.0/2.3 Male Straight connector for Low-Loss 195 — engineered for durable, reliable RF interconnect with predictable contact (push-pull) and long-term mating cycle reliability.

I.Electrical Characteristics

Nominal Impedance (Ω)	50
Frequency Range	DC-10 GHz
VSWR, ≤ 3 GHz	≤ 1.130
VSWR, ≤ 6 GHz	≤ 1.220
Insertion Loss Coefficient (× √F GHz) (dB)	≤ 0.150
Insulation Resistance, min (MΩ)	≥ 5000
Proof Voltage (V)	1000

II.Mechanical Characteristics

Interface	1.0/2.3
Gender	Male
Orientation	Straight
Mate Style / Interface Engagement	Push-Pull (Quick-Lock)
Cable Type	Low-Loss 195

III.Mechanical

Coupling Torque	Push-on (no torque)
Mating Cycles, min (cycles)	≥ 500

IV.Environmental

Operating Temperature Range (°C)	-40 to +85
Thermal Shock — IEC 60068-2-14, Test Na	Compliant — IEC 60068-2-14 Test Na, -40 to +85 °C, 5 cycles
Vibration — IEC 60068-2-6, Test Fc	Compliant — IEC 60068-2-6 Test Fc, 10–2000 Hz, 5 g, 3 axes
Shock — IEC 60068-2-27	Compliant — IEC 60068-2-27, half-sine 100 g for 6 ms, 3 axes
Weather Standard — IEC 60068-1	IEC 60068 -40/+85/21d

V.Materials & Finishes

Body / Outer Conductor — Material	Brass
Body / Plating	Cu-Sn-Zn ternary (White Bronze / Albaloy)
Pin / Inner Conductor — Material	Brass
Pin / Plating	Au over Cu (0.1 µm Au min, no Ni in stack)