7/16 DIN Male to 7/16 DIN Male Low PIM factory-made jumper. 123eWireless factory-made assemblies are optimized to produce low passive third-order inter-modulation. Each jumper is dynamically PIM tested to IEC 62037 standards, certified to guarantee performance, and averages -165dBc. MADE in the USA.
CROSS REFERENCE | |
Alternative To | |
ELECTRICAL SPECIFICATIONS | |
Frequency Range | 600-3000 Mhz |
Impedance | 50 Ohm |
PIM | -171 dBc IEC 62037-2 |
Return Loss | -26dB @3GHz; -23dB @6GHz |
VSWR | <1.10 |
ENVIRONMENTAL SPECIFICATIONS | |
Operating Temperature | -55°C to +85°C |
Weather Standard | IEC 68 40/85/ 21 |
PHYSICAL SPECIFICATIONS | |
Dielectric Material | Foam PE |
Maximum Bending Radius | 2.00" |
Outer Conductor | Helically corrugated copper |
Connector A | 7/16 DIN Male |
Connector B | 7/16 DIN Male |
Jacket Color | Black |
Jacket Material | PE - UV Resistant |
Outer Diameter | <0.53in |
1/2" SuperFlex 7/16 DIN Male to 7/16 DIN Male Low PIM Jumper |123-2DMDM| 123e.com
- Product Code: 123-2DMDM-XX-P
- Availability: 1 Week