Capabilities

Engineering solutions for fiber, RF, power and connectivity.

Suggested designs our AI Engineering Assistant drew for customers' requests — products we can build, each with its pre-engineering part number. Open one to see the drawing.

Need a Custom Solution?

Describe your requirements and a 123e engineer will work out the design with you.

Talk to an engineer →

123-AIE00002

Hybrid 2-Fiber Single-Mode / 2-Conductor 12 AWG Power Cable

Hybrid cable with 2 single-mode fibers and 2x12 AWG copper power conductors

123-AIE00001

Hybrid Fiber / Power Cable

Plenum hybrid cable: 2 single-mode fibers + 2 × 14 AWG copper, one run

Hybrid 2-Fiber Single-Mode / 2-Conductor 12 AWG Power Cable

123-AIE00002 · Suggested combined optical and power cable for a single run to remote radio or power

This is a suggested 123e design for a hybrid optical/power cable that combines 2 single-mode optical fibers with 2 copper power conductors of 12 AWG, built into a single outer jacket. It is intended as a starting point for discussion with 123e's engineers to finalize conductor construction, jacket material, strength member and voltage rating to match the installation. Typical use is for a single combined run to a remote radio unit, small cell, or similar equipment needing both fiber connectivity and local DC power over one cable, reducing the number of separate runs needed between a hub and a remote location.

What it could be used for

remote radio unit power and fiber feedsmall cell sitesdistributed antenna systemscombined fiber/power backhaul runs

A suggested design for discussion — not a quotation or a released specification. Call (949) 888-5548 and give part number 123-AIE00002, or contact our team.